1. Delta Cycle Michelangelo
Specifications:
- Bikes supported: 2
- Weight capacity: 100 lbs.
- Construction: Premium silver powder coat finish
- Dimension: 84” x 20” x 16”
- Weight: 12.6 lbs.
- Warranty: Lifetime
What you will like about this one that sits on the floor is the fact that it
doesn’t require drilling holes for installation. You just have to put all the parts together, incline it against the wall, and position the bikes on the brackets. However, in case you want to secure it with wall anchors, you can use the included anchoring hardware. This aspect makes it easy to relocate it if you wish to change the storage spot or in case you move.
The assembly is pretty simple and it won’t take more than 10 or 15 minutes. Once assembled, it measures 83 x 19.75 x 16” and it can hold a maximum weight of 100 pounds.
The rack fits in any decor as it has a nice silver powder coat that also acts as a protective layer against corrosion. It has a rubber bumper at the top end to avert damaging your wall and rubber feet to increase its stability while avoiding scratching. There is a rubber coating on the brackets, to avoid paint chipping and to secure onto the bike. You can alter the position of the hooks, to match the dimensions of the bike.
PROS
- Ingenious design that doesn’t involve wall holes
- The main parts are covered in rubber for protection
- Lightweight yet very stable
- The upright design accommodates two bikes
- Very small footprint to take as little space as possible
CONS
- Some users feared it might tip over the front
- It’s not very good for two large bikes
VERDICT
Ideal for confined spaces and garages, this rack assembles effortlessly. Customers mostly prefer it because they don’t have to make holes in the walls as it stands on its own. The overall design is attractive and it can even be placed in a room or office and it will not seem out of place.
2. Steadyrack Classic B-SCSR02-004
Steadyrack Classic B-SCSR02-004
Specifications:
- Bikes supported: 1
- Weight capacity: 77 lbs.
- Construction: Steel with UV-treated plastic
- Dimension: 5” x 22” x 25”
- Weight: 4.95 lbs.
- Warranty: 90-days
This wall-intended model can fit hybrid, road, and select bikes with a wheel size between 20” to 29” and widths up to 2.4-inch. Besides, due to the
metallic extending brackets and UV-treated plastic, it can sustain a bike up to 77 lbs. without any risk of falling. This vertical stowing solution will keep the bike upwards and the tire will rest against the included steel tire wedge.
For limited storage space, the 180-degree side-to-side swivel is the cleverest invention that lets you position the bike either close to the wall or sticking out from it. As the bicycle is positioned upwards, there’s enough space for parked cars and it can be fitted in congested areas. In contrast with the other models in its price range, you can effortlessly load the bike by rolling the front tire up into the bracket. It comes with all the essential elements for installation so you won’t have to pay extra money.
PROS
- Designed with 180-degree pivot feature
- It folds flat onto the wall when not in use
- Made from corrosion-resistant steel
- The floor area is completely freed
- Effortless setup and bike accommodation
CONS
- It holds only 1 bicycle
- A bit pricey
VERDICT
Purchase this with confidence as it will fit a variety of bicycles. Furthermore, if you have limited strength, this is another excellent choice as you simply need to balance the bike and push for it to go into the designated place. Thus, no heavy lifting is required.
3. Bike Nook 203-3337201
Specifications:
- Bikes supported: 1
- Weight capacity:
- Construction: Steel
- Dimension: 15” x 22” x 30”
- Weight: 4 lbs.
- Warranty: 90-days
Similar to other models mentioned in this review, this will offer
vertical storage but at ground level. Thus, you no longer have to worry about lifting the weighty bike to make room for your other things in your home. Furthermore, it will also protect the bike from scuffs and damages to its surroundings such as ceilings and walls.
It doesn’t have a weight limit because the bike basically sits on the floor, you just need to know that it can only fit one bike, regardless of its weight. The part that grips the wheel fits sizes 18” or bigger so it can hold a range of mountain, casual, or children’s bikes. It’s very easy to mount, as it doesn’t require being fixed to a wall and it can be easily relocated. All you need to do is put all the floor parts together in a T-shape and extend the telescopic vertical pole until it will reach the right height to sustain the seat.
PROS
- It can be moved as it’s not a permanent addition to the room
- It is appropriate for many bike extents
- The bike can be effortlessly loaded and unloaded
- A small footprint so you can sneak it in a corner
CONS
- It can only deposit one bike
- The assembly directions are very vague
VERDICT
If you like its design and abilities, you should know that it’s one of the most durable and qualitative choices. It can conveniently be positioned anywhere around the house and it can free up 3.5 ft. of floor space. Thus, it’s another excellent choice for those who have limited space.
4. Rage Powersports Apex
Specifications:
- Bikes supported: 2
- Weight capacity: 110 lbs.
- Dimension: 5” x 17” x 114”
- Weight: 10.1 lbs.
- Warranty: 1 year
This is an upright version that
can hold one or two bikes weighing no more than a total of 110 lbs. The pivoting hangers and hooks will keep the bicycle’s balance with the center of gravity. It is exceptional for optimized bicycle storage in the garage, apartment, basement, and even shed. It features a quick support pole with a twist-to-tighten design that extends from 63” to 114” high, and a rubber insert for the top hanger that keeps the bike in place.
It boasts a heavy-duty frame with grooved rubber footpads and a foam grip handle. To use this holder, you just need to locate ceiling joists or studs for a very solid placement, then telescope open to the approximate size required. Once you do so, you must unscrew padded feet equally on each end until the bar will actually stay in place, and then tighten very well by turning the entire bar firmly by hand at the foam grip.
PROS
- The fitting process is very straightforward
- The distance between the two bikes is modifiable
- It doesn’t require holes in the walls
- Foam covers the hooks to protect the paint job
CONS
- The weight limit is not very generous for a two-bike holder
- The design seems flimsy
VERDICT
We recommend this holder because it is adjustable and it has a maximum 110-pound capacity. Furthermore, it is one of the best-selling products at the moment, its appeal to customers proving that it is a quality pick.
5. CyclingDeal 5 Bike
Specifications:
- Bikes supported: 5
- Weight capacity:
- Dimension: 18.5” x 14.6” x 3.9”
- Weight: 13.23 lbs.
- Warranty: 10 years
For
depositing more than 4 bikes, this floor model is the most adequate. The supports are constructed of superior steel that is powder-coated for corrosion protection for many years. It only weighs 10 pounds and since it stands on the floor, it doesn’t actually have a weight limit. This is great news if you have heavy bikes and want to deposit them safely.
It measures 14.3 inches by 70.07 inches by 2.75 inches. Of course, as it can lodge a high amount of bikes, you must expect it to occupy more space than other models do. Best of all, the manufacturing company provides a 10-year protection period for it.
PROS
- The lifelong metal frame is weather-proof
- Generous warranty period
- Effortless to dismantle
- It is ideal for large families with numerous bikes
CONS
- It has a large footprint
- Bikes seem to sit awkwardly in the supports
VERDICT
Able to lodge up to 5 bikes, it is the ideal pick for large families who enjoy riding in the great outdoors. Since it’s a floor model, expect it to involve more space, but it will certainly turn out useful if you want to keep multiple bikes safe.
6. Tidy Garage BR1
Specifications:
- Bikes supported: 4
- Weight capacity: 300 lbs.
- Construction: Heavy duty powder coated steel frame
- Dimension: 24” x 3” x 12”
- Weight: 4 lbs.
- Warranty: 30-day money back guarantee
This model is intended to be attached to a wall. You can use it to hang up to 4 bikes vertically or you could order 2 and hang the bikes horizontally between the two holders. The
total weight limit reaches 300 lbs., so it will be enough to lodge the bikes for a whole family. The holder is made of heavy-grade steel with a white powder coating for rust protection, and 4 vinyl-covered hooks that will protect your bicycle from scratches. The necessary mounting hardware is included to prevent any additional costs.
It weighs 4 pounds and it stands out 24 inches while the height is 12 inches. Therefore, it is the perfect choice for all those who are looking for a clever way to deposit their bikes. However, there is one downside to it, more precisely the fact that it lacks an actual warranty, the manufacturing company only providing a 30-day money-back guarantee for the product.
PROS
- Enables you to hang up to 4 bikes vertically
- Durable white powder-coated metal frame
- Vinyl coated steel hook to avert scratches
- Has an extended load capacity
CONS
- Limited warranty period
- The bikes are stored too close to each other
VERDICT
A rack that helps organize up to 4 bikes to keep them out of sight and free up space, it delivers a durable build that ensures you are making a lifelong investment. It easily mounts on the wall but you might be annoyed by the small distance in between the bikes.
7. Monkey Bars 2.0
Specifications:
- Bikes supported: 3
- Weight capacity: 200 lbs.
- Construction: Powder coated steel
- Dimension: 35” x 3” x 4”
- Weight: 4.8 lbs.
- Warranty: Lifetime
Lodging a bike in a tight area can be rather difficult and it gets even harder if you are not the only one passionate about cycling. This rack is a great choice not only for large spaces but also for smaller ones, like sheds or studios. Nevertheless, you can efficiently
deposit up to 3 bikes everywhere you want. The installation process is very simple, and it only takes 15 minutes, the included accessories being 2 shed brackets, 1 – 35′′ monkey bar, 3 j hooks, and 1 hardware bag.
It doesn’t limit you on the size of the bikes as it has a generous weight capacity of 200 pounds. The steel composure is powder-coated so it’s rust and corrosion-resistant. Additionally, the hooks easily slide on the bar for effortless adjustability, which is quite helpful. In what concerns the warranty, you will surely love the fact that it comes with a generous lifetime warranty, which means the rack is very strong and stable.
PROS
- Provides a large hold capacity
- Doesn’t occupy too much space
- Appropriate for bikes of various sizes
- The hooks can easily slide on the bar for effortless adjustability
CONS
- Hanging the bikes by the hooks is a backbreaking job
- Some customers complained that the hooks fell off the brackets
VERDICT
This is a great pick because it can easily hold no less than three bikes regardless of their size. The hanger per se is made of very resilient steel, which is what promises it will be a lasting investment. Best of all, it holds 3 bikes simultaneously.
8. RAD Sportz 2- Pack Bicycle Hoist
RAD Sportz 2- Pack Bicycle Hoist
Specifications:
- Bikes supported: 2
- Weight capacity: 2 x 100 lbs.
- Construction: Steel frame and rubber hooks
- Dimension: 9” x 6” x 12”
- Weight: 8 lbs.
- Warranty: Lifetime
The construction of this holder is different, considering
it involves mounting on the ceiling and it includes claw-like hooks that grab the bike’s seat and handlebars. It can be installed in spaces up to 12 feet high and features a neat safety lock mechanism that ensures an unplanned release won’t occur. It might seem tricky to install but given that it arrives fully assembled, all you have to do is drill the holes and attach it to the ceiling.
In the box, there are 2 racks included so that you and your significant other can separately and accessibly hang your bikes when you are not using them. Considering that you get two pieces, the asking price is quite reasonable. Each can lift up to 100 pounds, and feature hooks covered in rubber that prevents scratches. Best of all, a lifetime warranty is offered by the manufacturing company.
PROS
- Any unintentional release is prevented by the locking mechanism
- The best alternative for freeing floor space
- Two hoists are included
- Impressive weight limit
CONS
- Handling seems hard for some users
- It feels a little wobbly because of the cords involved
VERDICT
Rather reasonably priced and easy to set up by any decent DIY type, 2 products are included in the package so that you can hang 2 bikes as securely and conveniently as possible. The fact that it practically keeps the bikes hanging might seem a little unpleasant for some, but it’s the ideal pick if you want to free the floor.
9. Stalwart 75-ST6016
Specifications:
- Bikes supported: 1
- Weight capacity: 50 lbs.
- Construction: Steel with EVA foam-coated hooks
- Dimension: 13.25” x 11.6” x 4”
- Weight: 2.34 lbs.
- Warranty: 30 days
Sturdy and practical, this wall mountable hanger rack optimizes your garage organization by freeing up the space your bike would normally take. Its sturdy build enables it to
accommodate a bike that weighs up to 50 pounds, meaning it’s not the most heavy-duty out there, but it can handle all types of bikes regardless of their shape. It is made of tough steel and the hooks are coated with soft EVA foam to avert scratching.
It measures 13.25 inches in length by 11.6 inches in width by 4 inches in height, so it won’t stick out too much. As it includes all the installation hardware you need, there are no extra purchases that might come up. Alas, the accompanying warranty is only 30 days long, which is shorter than the industry standard.
PROS
- Soft EVA foam coating on the hooks provide a gentle surface for the bike to sit on
- Comes at a cheap price
- Compatible with all bikes in its weight accommodation range, regardless of their type
- It doesn’t stick out too much, to avoid wasting space
CONS
- Warranty is shorter than that of competitors
- Included screw heads strip easily
VERDICT
It’s very simple to mount and use, providing you with the possibility to lodge a bike that weighs up to 50 pounds. Its sturdy build ensures long-lasting durability, while the cheap asking price makes it an accessible acquisition.
10. Dirza Bike Rack
Specifications:
- Bikes supported: 2
- Weight capacity: 65 lbs.
- Construction: Heavy duty construction
- Dimension: 10.2” x 4.3” x 2.6”
- Weight: 1.2 lbs.
- Warranty: Lifetime
This practical and simple to install rack doesn’t require any assembly. The fixed hooks will let you hang and detach the bike within few seconds. Therefore, you will be able to save space. The
maximum hanging weight is 65 pounds, which means that you can use it for road or mountain bicycles, folding bikes, and children’s bikes, but it is not the top pick for fat tire bikes or electric bikes as they are heavier.
The hanger is made from hardwearing solid steel and it weighs 1.25 pounds, the lightweight design making it easy to maneuver during the set-up. To prevent the paint job from getting scratch, the hooks have been coated in anti-scratch rubber. However, it’s worthy to mention that you should only install the hanger on studs, not drywall. The manufacturer stands behind the product with a refund policy that allows you to get your money back in case you are not happy with the rack.
PROS
- Refund policy from the manufacturer
- Vertical bike hanger for maximum space-saving
- No bending even after years of use
- The hooks don’t affect the bike’s paint
CONS
- Not the most stable on drywalls
- Some are not happy with the quality of the screws
VERDICT
This is a good investment for many reasons, starting with the ease of installation. The design is very space-friendly and the bike will be held in ideal conditions without the risk of getting scratched. Since it’s a wall model, you need to pay attention to the sturdiness of the wall you decide to put it on.
11. Allen Sports 201B
Specifications:
- Bikes supported: 2
- Weight capacity: 75 lbs.
- Construction: Powder coated steel
- Dimension: 16.9” x 15.3” x 3.4”
- Weight: 4.15 lbs.
- Warranty: Lifetime
This storage rack works as a repair stand as well, which is a noteworthy advantage. You can easily install it yourself using only one wood screw. When extended, it measures ures 15.3 inches by 3.1 inches by 16.7 inches. As
it folds up out of the way when not in use, it won’t present a hazard to those roaming around in the garage carelessly. It can be used to lodge up to 2 bikes, but note that it only works for an adult and a kids’ size bike.
It sustains bikes that weigh up to 75 pounds, the sturdy steel build ensuring durability in the long run. Another highlight that you are sure to appreciate is the reasonable asking price. The manufacturer provides for it a lifetime warranty on workmanship and materials, keeping customers 100% satisfied.
PROS
- Can double as a repair stand
- Lifetime warranty on workmanship and material
- Comprehensive installation steps
- It can hold two bikes without occupying extra space
CONS
- The load capacity is very small
- It doesn’t work for two adult-size bikes
12. Rubbermaid FastTrack 1784457
Rubbermaid FastTrack 1784457
Specifications:
- Bikes supported: 1
- Weight capacity: 50 lbs.
- Construction: Epoxy powder-coated finish
- Dimension: 2.6” x 10.5” x 14.2”
- Weight: 1.8 lbs.
- Warranty: 1 year
This is
a single-bike holder that needs to be secured onto a wall. It is specially intended to hold most bikes with 12- to 26-inch frames that can weigh up to 50 lbs. The hook is part of an assembly designed by Rubbermaid, intended to help you capitalize storage space and keep your things organized. It is basically a cast aluminum gripper that will snap tightly enough into the FastTrack rail system for that mounting application. Furthermore, it is protected with a soft coating that will not scratch the bike rim.
It conveniently folds up against the wall when it is not being used to leave you enough space to move around. It has a satin nickel powder-coated finish that will not rust, chip, or crack for years, which means that this item is a long-term investment, which will not disappoint you absolutely at all. However, notice that this is only the bike hook and you will require owning or purchasing the mounting rail separately. Once you have it, you can buy additional hooks and holders for other stuff like tools, garden supplies, ladders, or even outdoor sports items.
PROS
- Very easy to fit
- A very soft coating that will protect your bike
- Folds up against the wall
- It is coated in a rust-protective paint
CONS
- It can only store one bike
- Not all hardware is included with the purchase
VERDICT
This wonderful bike rack is excellent for those who have a bike and want to store it but have limited space in their garage. The only inconvenience is that you must also buy the mounting rail that can hold other racks and hooks.
13. Racor – B-1R
Specifications:
- Bikes supported: 1
- Weight capacity: 50 lbs.
- Construction: Steel with epoxy finish
- Dimension: 10” x 4” x 3”
- Weight: 1.2 lbs.
- Warranty: 1 year
If you simply need to keep one bike in place or out of sight, then the Racor B-1R is exactly what you should go for. It can support in a vertical position
a bike that weighs up to 50 pounds, an aspect that you need to take into account as anything heavier leads to damage.
It boasts a steel construction with a white epoxy finish that ensures corrosion resistance for years of rust-free storage, and it weighs 1.2 pounds so it will not be hard to mount it on any studded wall. To mount it, you need to measure the height of your largest bike while leaning both tires against the wall. Then, attach the rack using the included screws and it will sustain the bike, keeping it from falling. The rack is equipped with an exclusive security loop that accepts cable locks for optimal theft-deterrence indoors and outdoors. Furthermore, it comes with a 1-year protection period.
PROS
- Solid metal construction with a rust protection coating
- Optimal durability and support
- It is very compact as it doesn’t stick out from the wall
- Reasonably priced
CONS
- It can only hold a small bike
- Fragile construction that doesn’t seem very trustworthy
VERDICT
This is a great product as it can store one bike vertically along the wall for extra space saving. Some molded rubber hook guards will protect the tire and rim as well. Therefore, you will not need to worry that your bike might be damaged, because it will not be affected absolutely at all.
14. Dirza Dir-53b
Specifications:
- Bikes supported: 1
- Weight capacity: 38 lbs.
- Construction: Steel with rubber padding
- Dimension: 18” x 2.7” x 2.4”
- Weight: 1.85 lbs.
- Warranty: N/A
It might only be able to hold a single bike, but if you don’t need a bigger capacity that exceeds its 38 lbs. limit, this is the right model to go with. The
space-friendly design it boasts makes it ideal for crowded garages, while its mere 3-pound weight ensures you won’t have a hard time mounting it. It brings a foldable design so that when the bike isn’t placed on it, it won’t get in your way as you can put it in a vertical position.
A downside would be the lack of a rubber coating on the holding hooks, which could result in some paint chipping. Unfortunately, we couldn’t find information regarding a potential warranty period, but this isn’t all that problematic when you take into account the reasonably cheap price it comes at.
PROS
- Features a padded soft rubber hanger
- Weighs only 3 pounds so it mounts effortlessly
- Very attractive price
- The foldable design ensures it will be out of your way when empty
CONS
- The support handles are not rubber-padded
- Not the sturdiest build for heavy bikes
VERDICT
Presenting you with a space-friendly solution to deposit your bike, this is the perfect model to keep the transportation means protected when it isn’t in use. Because it also comes at a cheap, affordable price, it is one of the most attractive choices a bike owner could make.
What Makes It a Necessity
If you’re not the type of person who likes to go shopping and make purchases compulsively, then you most probably always like to weigh the benefits and drawbacks of making a certain acquisition. In case you’re a bike owner, you will shortly learn that buying a rack will help you a lot.
-
It’s Space-Saving
One of the essential benefits that come with installing a bike holder is the amount of space you will get to save and use for better purposes. Seeing how you most probably store a multitude of items in the garage, it truly comes in handy to have the possibility of clearing floor space by installing a holder that will pile the bikes. Wall-fitted racks and those that keep the bike in an upright position can help you save around 3.5’ of space.
-
It Reduces Clutter
If you’re the type of person whose garage is a storage place for items that they don’t use regularly or that they use outdoors, this area of the house is probably a war zone. Clutter inevitably appears when you store too many items in the same room, and it makes it practically impossible to find what you’re looking for with ease or without hurting yourself by knocking over who knows what object you forgot you even had there. The addition of the holder to the garage will make a huge difference, helping you clear out the mess and reducing the clutter considerably.
-
The Bike is Kept Safe
If the garage is over-cluttered, chances are something will hit the bicycle and damage it. Also, it will be very hard for you to reach and take it out if you have a hard time finding it among all the mess. This can be avoided if you put your bike on a wall or floor rack, away from all the chaos.
It can make a big difference when it comes to the longevity of the bike’s tires as well. If you have concrete floors, these could pull the moisture out of the tires, causing them to crack. Thus, distance from this surface could make a huge difference when it comes to your expenses in maintenance.
Frequently Asked Questions
Can it hold mountain bikes?
All the models we have mentioned are suitable for stowing all types of bikes regardless if they are standard or road bikes.
Can you deposit 4 bikes on a 3-bike holder?
No, it’s never safe to put an extra bike as it might cause the screws to loosen and the rack will eventually fall, ruining your bicycles.
Can I place it on a concrete wall?
Yes, but do note that you may need extra-strong bolts or equipment. If you are in doubt, refer back to the user manual that comes in the box.
Will it hold above maximum weight?
Most of the depicted models are made of durable steel and they will hold even more than the recommended load. However, we do not advise doing this as you could end up damaging it.
How long do garage bicycle racks last?
Given they are made of a solid, long-lasting material that isn’t prone to rust, you will get to enjoy them for a long time. Of course, their endurance also relies on how well you take care of them.
How can we mount a bicycle bracket on the wall?
First, you must measure the space and see how much you will need for all the bikes to fit. Make sure you don’t place it too high or too low because it will be uncomfortable for you to maneuver the bikes. Drill holes in the wall and securely screw the rack using a plug in each hole, to make sure it will be resilient.
Can bicycles be deposited vertically?
If you are concerned that this position will damage the brake system, note that it is completely sealed so there is no reason to worry.
How much space do I need to lodge a bike?
This mainly relies on the dimensions of your bikes, but on average, you will need about 71” long, 25” wide, and about 43” high to store an adult bike. You can add a few inches if you want to make sure the handlebars will fit perfectly.
Should I deflate the tires for storage?
This is a real concern because it’s known that if the bike sits too long on its tires, they might deflate. To avoid this if you want to deposit the bike for a long period of time, you can opt for a wall or ceiling-mounted model. You can also choose to flip the bike.
Conclusion
For those who love to ride the bike in their free time or when they go to work, storage is a sensitive issue when it comes to their bikes. Fortunately, any of the garage bike racks presented in this top does a more than wonderful job at keeping the bikes in a safe environment while they are not in use, all while freeing up ground space. To get the bigger picture and see exactly which model would suit you best, let’s have a last look at the most qualitative and useful racks.
Best Overall:
Delta Cycle Michelangelo
The practical design and the extended load capacity make it worthy to be our top choice. It is solid enough for two bikes, so it’s an excellent option for a cycling-loving couple. Since it’s a standalone model, you are free from the burden of drilling holes in your walls. Even so, it is very steady and resilient. It’s a great addition to the garage but it can also blend seamlessly in the balcony or in the hallway.
Editor’s Choice:
Bike Nook 203-3337201
We chose this one as our favorite because it installs with no hassle in any area of your home, and since it’s not screwed to a wall, it can be moved at any time. It stands conveniently on the floor without requiring you to put holes in the walls and it works as a provisory storage spot. The bicycle is maintained in an upright position so there is very little space taken, which is ideal if you want it for confined areas.
Best Garage Bike Storage Rack for Floor Standing:
CyclingDeal 5 Bike
People who don’t want holes in their walls consider buying a floor-placed stand, like this one. It’s the type you find in front of office buildings, stores, or public institutions and it can stock up to 5 bikes at once, in the 5 compartments for the tires. Even more, it is made from high-grade metal layered with a powder paint finish thus you don’t have to worry about it rusting or corroding with time.
Best Storage Rack for Heavy Bike :
TidyGarage BR1
Perfect for stowing bikes off the floor and out of sight, thus providing you with more space, it comes with a generous load limit of 300 pounds. It must be fitted on the wall and it’s large enough to fit 4 bicycles in an upright position, with the handles alternating to the right and left. The metallic body has been treated with an anti-corrosion paint to ensure it will remain solid for many years.
Best Wall Mounted Bike Storage Rack:
: Monkey Bars 2.0
Wall fixtures are the most popular among customers when it comes to depositing bikes for a certain period of time. Monkey Bars offer a perfect solution for when you need your bikes lodged without having the garage floor crowded. The fast installation takes only 15 minutes of your time, and the holder comes with a generous capacity, as it can sustain up to 200 pounds. Even more, it allows you to stack up to 3 bikes simultaneously for more efficient space usage.